Question 1: What should I do if laminating film always wrinkles?
Solution:
Check whether the temperature of the laminating machine is appropriate
Laminate the laminating film flat before laminating
Feed the paper at a uniform speed
If it is already wrinkled, you can lower the temperature and pass it again
Question 2: How to deal with bubbles after laminating?
Solution:
Poke a small hole at the edge of the bubble with a fine needle
Press gently to expel the air
Pass the laminating machine again
Question 3: What is the reason why the laminating film does not stick firmly?
Possible reasons:
The temperature is not high enough
The quality of the laminating film is problematic
The paper is too thick
Solution:
Raise the temperature appropriately
Thick paper can be laminated twice
Question 4: How to restore the document that becomes bent after laminating?
Solution:
Use a heavy object to flatten it immediately after laminating
You can put it in a thick book and press it for 24 hours
If the bending is serious, you can pass it through the laminating machine again at a low temperature
Question 5: How long can the laminating film be stored?
Storage time:
Generally 5-10 years for indoor storage
Avoid direct sunlight and high temperature
A humid environment will affect the storage time
Question 6: Can laminating film be reused?
Answer:
Ordinary laminating film cannot be reused
There is a special reusable plastic bag
Reuse will affect the plastic sealing effect
If you have other questions, please leave a message in the comment area for discussion.
