1. Bubbles after laminating
Problem causes:
There are dust and impurities on the surface of the Lamination Film or the document.
The laminator temperature is not high enough, resulting in insufficient bonding of the Lamination Film.
The laminating speed is too fast and the air cannot be completely exhausted.
Solution:
Before laminating, use a clean cloth to clean the surface of the Lamination Film and the document to ensure that there is no dust or impurities.
Adjust the laminator temperature according to the thickness of the Lamination Film to ensure that the temperature is appropriate.
When laminating, the speed is uniform and avoids being too fast to allow the air to be fully exhausted.
2. Wrinkles after laminating
Problem causes:
The document is not placed flat, resulting in uneven force on the Lamination Film.
The roller of the laminator has foreign matter or is damaged, resulting in uneven Lamination Film.
The Lamination Film is damp or of poor quality.
Solution:
Before laminating, ensure that the document is placed flat and the four corners are aligned.
Clean the roller of the laminator regularly to ensure that there is no foreign matter or damage.
Choose reliable quality Lamination Film and store it properly to avoid moisture.
3. Documents fade after laminating
Problem cause:
Using inferior Lamination Film with poor UV protection.
The temperature of the laminator is too high, causing the color of the document to be damaged.
The document itself uses ink or pigment that is easy to fade.
Solution:
Choose high-quality Lamination Film with UV protection.
Adjust the temperature of the laminator according to the material of the document to avoid excessive temperature.
Try to use ink or pigment with good light resistance to print documents.
4. Paper jam in the laminator
Problem cause:
The document is too thick or too thin, which exceeds the applicable range of the laminator.
The size of the Lamination Film does not match the document.
The roller of the laminator has foreign matter or is damaged.
Solution:
Choose a Lamination Film that matches the thickness of the document and ensure that the document size is within the applicable range of the laminator.
Use a Lamination Film that matches the size of the document.
Clean the roller of the laminator regularly to ensure that there is no foreign matter or damage.